I listor: 10
Inget betygWestern Digital Red 4TB & Se 4TB Hard Drives
ConclusionWestern Digital Red 4TB The 3TB and 1TB Red drives we reviewed last year had excellent energy efficiency, whisper quiet operation, and very low vibration levels. The new 4TB version is a bit noisier and uses more power but the differences are proportionate to its higher capacity and it still sounds pretty good. Its performance as a boot/OS drive is particularly impressive, surpassing older 7,200 RPM drives, and improving on the Red 3TB variant by about 10% in real world tests. It's also equipped with firmware specifically to play well in multi-drive NAS/RAID configurations, and has been tested for compatibility with a variety of popular NAS devices. At 3 years, the warranty is also longer than typical as well and Red drives qualify for 24x7 support. The WD Red 4TB is selling for about US$200, which isn't great in terms of sheer capacity:cost compared to a typical 3TB model, but for a 4TB eco-friendly sub-7,200 RPM drive, it's more than fair. Seagate has a similar 4TB NAS drive on the market for the same price but it lacks the extra support and warranty. Cheaper models lacking RAID-optimized firmware like the WD Green and Seagate Desktop 4TB are viable alternatives for basic desktop use, but you don't really save much, about $10~$30. If we were talking about a US$100 drive, this would be significant difference but at the much higher price-point, we have little hesitation recommending paying a bit more. Western Digital Se 4TB The WD Se 4TB exhibited exceptional performance, producing the best real world results we've obtained from a 7,200 RPM drive, beating out the previous generation 10,000 RPM VelociRaptor 600GB. It's not particularly quiet by modern standards but the sound it produces isn't unpleasant and shouldn't bother the average user. It does vibrate more than the Red series, and used in a desktop, it would definitely benefit from suspension. That being said, if used alone as a single drive, it's probably not worth the bother if the drive cage is well-secured and at least damped with good rubber grommets. The Se line is RAID-optimized but it hasn't been tested for consumer NAS operation, nor does it have day and night support. It does go through a rigorous testing and burn-in phase to ensure reliability, comes with a 5 year guarantee, and has a multi-axis shock sensor which allows the drive to take steps to protect data when shock events occur. While you should always have backups, if you want peace of mind, this is a pretty solid bet. The WD Se 4TB can be found for US$260 and surprisingly, despite its extra features, isn't any more expensive than WD's standard high performance desktop drive, the WD Black, or most 4TB 7,200 RPM model in general. It's cost-effective enterprise storage marketed for high-end NAS and data center operation where performance is key. The speed is overkill for a typical home server or NAS but it certainly wouldn't be out of place as a standalone performance drive in a desktop/tower.
Inget betygWD Red 4TB HDD Review (WD40EFRX)
- At 4TB, this is now the largest hard drive available from WD that is tuned for NAS applications.
- Performs better than the Seagate NAS 4TB and the WD Red 3TB in single-drive benchmarks
- Ranks very well in a multi-drive RAID5 setting in our Synology NAS environment
- Slipped behind the 4TB Seagate NAS HDD in multi-drive small block sequential transfer speeds
Conclusion The WD Red HDDs are designed as the simple answer to the question: Which hard drive should I install in my NAS? Based on its consistent performance in our benchmarks, it is a good choice for NAS owners looking to maximize the capacity of their network storage device. The Red 4TB outperforms the Seagate NAS 4TB as well as the WD Red 3TB in our single drive benchmarks, while often managing performance near that of the Seagate Constellation CS or WD Se. When put in a multi-drive environment which these NAS HDD models are designed for, the 4TB Red offered competitive performance in both random and sequential workloads, and shined when it came to offering some of the strongest large-block sequential read and write speeds. Designed for both consumers and small businesses, the WD Red is a high reliability, low-power consumption device that provides 24x7 operation and now ships in a 4TB capacity that updates the line. Those features are extremely important to users in the market. WD's NASware 2.0 firmware optimizes the drive to operate in NAS environments by reducing noise and power consumption, providing tools to resolve issues, and limiting vibration. As we were able to show in this review, many of these updates paid off in our NAS environment.